Product parameters
| Product Name: | Aluminum Cable Trunking |
| Type: | cable trunking/cable duct/cable raceway/cable channel/wireway/cable trough/aluminum cable tray manufacturers/aluminum cable tray pricing/aluminum cable tray sizes/cheap cable tray/trunking cable tray |
| Material: | Aluminum Alloy |
| Surface Treatment: | Anodizing |
Product Size
| Width: | 50-1200mm |
| Side Rail Height: | 25-300mm |
| Length: | 2000mm,3000-6000mm or Customization |
| Thickness: | 0.6-3mm |
Steel Thickness (Recommend)
| 1.0mm--Width: | 50~100mm |
|
1.2mm--Width: |
100~150mm |
| 1.5mm--Width: | 200~500mm |
| 2.0mm--Width: | 600~700mm |
| 2.5mm--Width: | 800~1000mm |
| As customer requirements | |
Other Characteristics
| Color: | As customer requirements |
| Certification: | CMA/ILAC-MRA/CNAS/CE |
| Application: | Wiring system,cable management,electromechanical system,construction industry and so on. |
| Non standard specifications are availabe according to customer's requirement. | |
Aluminum Cable Trunking

Lightweight And High-strength
The density is only 1/3 of that of steel, and the tensile strength is more than 110MPa, which significantly reduces the installation load.

Self-corrosion Resistance
The oxide film is dense and corrosion-resistant, the salt spray resistance exceeds 2000 hours, and the maintenance-free life is up to 25 years.

Excellent Conductivity
It can be used as a grounding conductor
with a resistivity of s0.028Ω-mm'm, which improves system safety.

Flexible Installation
It can be cold-bent and cut on site, supports tool-free splicing, and the work efficiency is 40% higher than that of steel.
Aluminum Cable Trunking Electromagnetic Compatibility Solution
Aluminum cable troughs have unique advantages in electromagnetic shielding due to their excellent conductive properties. The bulk resistivity of aluminum alloy is only 28.2nΩ·m, which enables it to effectively reflect high-frequency electromagnetic waves. Measured data show that within the frequency range of 30-100MHz, the shielding effectiveness of aluminum troughs can reach 55dB, which is more than 3 times higher than that of non-metallic troughs. Taking Shenzhen Metro Line 11 as an example, the project adopts a 6061 aluminum alloy trough with an EPDM liner design, which not only achieves a shielding effectiveness of 58dB, but also successfully controls stray currents below 0.5A/m², fully meeting the requirements of GB/T32584-2016 standards.
However, the conductivity of aluminum also brings the risk of stray currents. In a humid environment, the electrochemical corrosion rate of aluminum-copper contact parts may be as high as 1.2mm/year, and the eddy currents generated when adjacent to high-voltage cables can reach 100A/m². In response to these problems, engineers have developed multiple protection solutions: in humid environments such as chemical plants, 1-2mm thick EPDM rubber pads can reduce the risk of corrosion by 90%; for special scenarios such as rail transit, the stray current intensity can be reduced by 70% by setting insulating joints every 20 meters with single-point grounding. Huawei's data center project innovatively uses galvanized aluminum troughs with segmented grounding design to successfully reduce the EMI interference between cabinets from 15mV/m to 3mV/m.
In actual engineering selection, differentiated solutions need to be adopted according to specific application scenarios: signal cable scenarios prefer aluminum troughs with insulating pads, and ensure that the grounding resistance is less than 4Ω; power cable scenarios recommend the use of galvanized aluminum troughs or copper-aluminum transition joints, and the distance between adjacent brackets is controlled within 1.5 meters to prevent eddy current overheating; in areas where strong and weak electricity are mixed, the trough spacing must be maintained above 300mm, and an 80-mesh nickel-based electromagnetic shielding net must be installed when necessary. All design solutions must pass strict verification such as EN50147-1 shielding effectiveness test and GB/T21431-2015 stray current detection.
Through scientific design and precise construction, aluminum cable troughs can fully meet the dual requirements of electromagnetic shielding and stray current protection. Compared with the traditional copper shielding trough solution, this aluminum-based solution can reduce the overall cost by more than 30% while ensuring performance, showing significant technical and economic advantages. With the continuous improvement of the requirements for electromagnetic environment in the 5G era, aluminum cable troughs will surely be more widely used in data centers, intelligent transportation and other fields.
Installation of aluminum cable Trunking
The installation of aluminum cable troughs requires strict standardized operating procedures. Before construction, the 6063-T5/T6 aluminum alloy trough must be inspected and accepted, with a focus on checking the integrity of the AA15 grade oxide film and the straightness deviation (≤1.5mm/m), and equipped with special cutting tools, torque wrenches (8-10N·m) and 500V megohmmeters and other equipment. During installation, attention should be paid to: the bracket spacing (horizontally ≤1.5m/vertically ≤2m) should be arranged reasonably, stainless steel bolts should be used for connection and a 3-5mm/10m thermal expansion gap should be reserved, special transition pieces should be used at corners (bending radius ≥6 times the trough width), the copper-aluminum contact surface should be coated with conductive paste, and drainage holes should be set every 5m outdoors. In terms of quality control, it is necessary to ensure that the insulation resistance between sections is ≥10MΩ, the grounding continuity is ≤0.1Ω, the horizontal deviation is ≤2‰, and the vibration area is well marked for anti-loosening.


Special solutions are required for special problems during installation. To cope with thermal deformation, expansion joints should be set every 30m and sliding brackets should be used; to prevent electromagnetic interference, strong and weak electricity should be laid in separate slots (spacing ≥300mm) and metal partitions should be installed at the intersection. In terms of safe construction, dust masks should be worn when cutting aluminum and burrs should be handled. When working at high altitude, the weight of a single slot should be ≤25kg (mechanical lifting is required for more than 6m), and protective measures such as anti-fall nets should be set up in the edge area. These technical requirements are formulated based on the characteristics of aluminum and engineering practice experience.
The project acceptance must be strictly carried out in accordance with standards such as GB50217-2018 and IEC61537-2006. In special environments such as chemical zones and coastal areas, additional 1000-hour salt spray tests and potential difference tests (adjacent metals ≤0.5V) are required. Through such systematic installation management, the construction quality can be ensured, and the technical advantages of aluminum cable troughs, such as lightweight (weight is only 1/3 of steel troughs) and corrosion resistance (lifespan ≥15 years in salt spray environments), can be fully utilized to provide reliable cable laying solutions for power, communication and other projects.

Hot Tags: Aluminum Cable Trunking, China Aluminum Cable Trunking manufacturers, suppliers, factory, wire support wagon, cable support truck, wire support truck, cable support wagon















