Flange Locking Nut

Flange Locking Nut

These are essentially nuts with locks. They easily rotate during tightening and loosening for fast assembly. Locked into position by a positive action. Some lock nuts require inserting a pin while others present a small lip or crown that is crimped inward when installed, gripping the shaft. While assembly is fast and more secure, this type of lock nut costs more.

Product Introduction
What Is Flange Locking Nut?

 

Flange locking nut, also known as flange nyloc nuts, are a type of self-locking nut that has a built-in washer. The washer is designed to distribute the load over a wider area, providing better grip and preventing the nut from loosening. Flange locking nut is best used in areas where their larger bearing surface can cover oversized holes or bridge elongated slots.

 

Advantages of Flange Locking Nut

 

 

Improved load distribution
One of the biggest advantages of flange locking nut is that they have a built-in washer that provides better load distribution. This ensures that the load is evenly distributed over a wider area, preventing damage to the surface of the material being fastened. This is particularly important in applications where high loads and vibrations are present.

 

Secure and reliable fastening
Flange locking nuts are specifically designed to prevent loosening and maintain a secure connection even in high-vibration environments. The nylon insert creates a prevailing torque, which resists rotational forces that may cause the nut to loosen over time. This ensures that the joint remains tightly fastened, reducing the risk of equipment failure and enhancing overall safety.

 

Enhanced sealing and leak prevention
The flange on the nut provides an additional sealing function. When tightened, the flange compresses against the mating surface, creating a tight seal. This helps to prevent the ingress of moisture, dust, and other contaminants into the joint. Consequently, flange locking nuts are commonly used in applications where leak prevention is critical, such as plumbing systems or hydraulic connections.

 

Ease of installation and reusability
Flange locking nuts are easy to install using standard tools. The nylon insert provides a self-locking feature, eliminating the need for additional locking mechanisms such as washers or locking adhesives. Moreover, these nuts can be easily removed and reused when necessary, making them a cost-effective option.

 

Corrosion resistance
Many flange locking nuts are made from corrosion-resistant materials such as stainless steel or zinc-plated steel. This enhances their durability and makes them suitable for use in outdoor or harsh environments where exposure to moisture or corrosive substances is a concern. The corrosion resistance of flange locking nut ensures their long-term performance and extends the lifespan of the fastened components.

 

Screw Connecting Nut

Screw Connecting Nut

We offer excellent customer support before, during, and after the purchase of our Bolt And Nut products.
Our mission is to provide our clients with the best quality products at the most competitive prices.

Square Neck Bolt

Square Neck Bolt

Our Bolt And Nut products are competitively priced without compromising on quality.
A new journey has been unfolded in front of us, and we are moving forward towards the set goal.

Mechanical Anti Loosening Nut

Mechanical Anti Loosening Nut

We offer fast and efficient shipping of our Bolt And Nut products globally.
We attach great importance to technological innovation, and we have a large number of advanced technological achievements and products in the Mechanical Anti Loosening Nut industry.

Channel Steel Plastic Wing Nut

Channel Steel Plastic Wing Nut

Our Bolt And Nut products are designed to withstand extreme conditions.
Innovation - innovation for human development, innovation for industry progress, innovation for project breakthrough, innovation for achieving personal value.

Reinforcement Device

Reinforcement Device

Our Bolt And Nut products are made using the latest manufacturing processes.
We respect credit, abide by contracts, guarantee product quality, and have won the trust of our customers with a variety of operating characteristics and competitive prices.

External Hexagonal Bolt

External Hexagonal Bolt

Our Bolt And Nut products are known for their precision engineering and durability.
We pay great attention to the cultivation of teamwork spirit of our employees, and regularly hold quality development activities to enhance the physical and psychological quality of our employees and cultivate teamwork spirit, so that they can have stronger execution and creativity in their work.

Flange Locking Nut

Flange Locking Nut

We provide customized solutions for Bolt And Nut products based on customer requirements.
We are committed to creating reliable products and improving service quality for customers, and strive to become a leading manufacturer for Flange Locking Nut in the industry.

 

 

Why Choose Us

Our factory

Our company is a professional manufacturer of electrical equipment products such as cable trays and seismic brackets. It is also a comprehensive electrical technology solution service provider that integrates research and development, production, sales, installation and after-sales support services.

Professional team

Our company has a professional technical team including (quality management team, professional design team, technical research and development team), constantly upgrading product technology, optimizing product quality, and having a talent reserve at a leading level in the industry.

Advanced equipment

Our company has leading domestic product production technology and advanced mechanical equipment, reform and innovation, continuous improvement, and constantly breaks through the original business pattern, striving to explore new business markets.

Excellent service

Integrity is rooted in society, quality creates the future, and Suzhou Shihao Technology's service capabilities and business scope continue to improve, forming a standardized, professional, and comprehensive service system.

 

 

Application of Flange Locking Nut

 

Automotive industry
Flange locking nut is used in various automotive applications, including engine mounts, suspension systems, and wheel hubs.

 

Aerospace industry
Flange locking nut is used in various aerospace applications, including aircraft engine mounts, wing attachments, and landing gear.

 

Construction industry
Flange locking nut is used in various construction applications, including steel fabrication, structural steel connections, and roofing systems.

 

Electrical and electronic
Flange locking nuts are used in electrical and electronic applications to fasten components and to provide insulation. The nylon insert in nylon insert flange nuts creates friction between the nut and the bolt, preventing the nut from loosening due to vibrations.

 

Marine
Flange locking nuts are used in marine applications to fasten various components, such as rigging and hardware.

 

Material of Flange Locking Nut
 

Steel
Steel flange locking nuts are the most common and cost-effective option. They are durable, strong, and resistant to corrosion. Steel flange locking nuts are available in different grades, each with varying strength and durability.

 

Stainless steel
Stainless steel flange locking nuts are resistant to corrosion and rust, making them ideal for outdoor and marine applications. They are also ideal for applications that require high strength and durability.

 

Brass
Brass flange locking nuts are visually appealing and have good corrosion resistance. They are commonly used in decorative applications, such as furniture and lighting.

 

Aluminum
Aluminum flange locking nuts are lightweight and have good corrosion resistance. They are commonly used in applications where weight is a concern, such as aerospace and automotive.

 

 

Flange Locking Nut

 

How to Maintain Flange Locking Nut

Regular inspection
Regularly check the flange locking nut for signs of wear or damage .

 

Clean
Clean flange locking nut regularly to remove dirt and debris that may accumulate and make them degrade.

 

Lubrication
Apply lubricant to the threads of flange locking nut to prevent rust and corrosion. This will keep them in good condition and reduce their risk of getting stuck or failing.

 

Replace
If you notice any signs of irreparable wear or damage, it is best to replace the anti-loosening nut to prevent any accident or failure.

 

 

How the Flange Locking Nut Works

Uses friction between mating threads to prevent loosening
Lock nuts which use friction are designed with pitted or flanged grooves and need greater torque to tighten and loosen. They don't spin freely along the fastener's shaft, as they begin to clamp down as you rotate them. This means longer assembly time for your application. However, they cost a lot less than the other lock-nut style. These types of nuts are called prevailing-torque nuts due to the resistance to rotation when assembling and removing.

 

Designed with a positive locking device
These are essentially nuts with locks. They easily rotate during tightening and loosening for fast assembly. Locked into position by a positive action. Some lock nuts require inserting a pin while others present a small lip or crown that is crimped inward when installed, gripping the shaft. While assembly is fast and more secure, this type of lock nut costs more.

Reinforcement Device

 

Bolts used with flange nuts

 

Flange nuts are typically used with bolts or threaded fasteners that have a compatible thread pitch and size. The choice of bolt depends on the specific application's requirements. Common types of bolts used with flange nuts include:


Hex head bolts: Hexagonal head bolts, often referred to as hex bolts, are a common choice when paired with flange nuts. They provide a sturdy and reliable connection and are widely used in construction, machinery, and structural applications.

 

Socket cap screws: Socket cap screws are another option when using flange nuts. They have a recessed hexagonal socket in their head, allowing for secure tightening with an allen wrench or hex key. Socket cap screws are often used in precision equipment and machinery.

 

Carriage bolts: Carriage bolts have a round head with a square shoulder just beneath it. Flange nuts are used with carriage bolts when a smooth and finished appearance is desired. These are commonly found in outdoor furniture and wooden structures.

 

Stud bolts: In applications where flange connections are prevalent, stud bolts and flange nuts are used together to create a reliable and leak-proof joint. This combination is commonly employed in the oil and gas industry for connecting pipelines and flanges.

 

How to Install The Flange Locking Nut

 

 

Prepare the threaded fastener

Check to make sure the threaded fastener (such as a bolt or threaded rod) is clean and free of debris or rust. A clean thread will aid in the creation of a proper and secure fit.

Choose the right lock nut

Choose the right lock nut for your application by considering thread size, material, and the amount of prevailing torque necessary.

Position the lock nut

Turn the lock nut clockwise to secure the fastener. Begin by hand to avoid cross-threading, which can cause thread damage.

Hand-tighten the lock nut

Tighten the lock nut by hand at first, until it is snug against the workpiece or the previously inserted nut. Check that it is correctly aligned with the fastener threads.

Use a wrench or socket set

To acquire the necessary level of prevailing torque, tighten the lock nut using a wrench or socket set. The amount of torque required will depend on the specific application and the lock nut type.

Apply thread lubricant

Before installation, if desired or specified, add a thread lubricant or anti-seize compound to the threads. This can reduce friction during tightening and improve the lock nut's efficacy.

Check for proper tightening

After tightening, double-check to ensure that the lock nut is securely fastened. It should resist loosening when subjected to vibration or external forces.

Test the connection

If applicable, test the connected components to ensure that they remain securely fastened even under stress or vibration.

 

 
Our Factory
 

 

Suzhou SCHHOW Electrical Technology Co., Ltd. was established in 2018 and is located in Suzhou, Jiangsu Province, known as the "Jiangnan Water Town". It is a professional manufacturer of electrical equipment products such as cable trays and seismic brackets. It is also a comprehensive electrical technology solution service provider that integrates research and development, production, sales, installation and after-sales support services.
The company has a complete organizational structure, strong technical strength, and complete facilities and equipment. It has a professional research and development, sales, and after-sales service team, with 8 years of intensive cultivation in the industry. Shihao Technology adheres to the business philosophy of "integrity based on society, quality creating the future", introduces international advanced technology, innovatively develops and enriches product categories, and tirelessly pursues excellent quality to meet market demand. So far, the company's products have been widely used in many fields such as construction, chemical industry, textile, machinery, shopping malls, hospitals, residential areas, etc. By relying on continuous improvement in craftsmanship, quality, and high-quality services, they have received unanimous praise from customers and gradually achieved an outstanding leading position in the industry.

 

product-1-1

 

product-1-1

 

 
FAQ
 

 

Q: What is the difference between self locking nut and flange nut?

A: A self-aligning nut, also known as a spherical nut or leveling nut, is a type of nut used in applications where the fastener is not perpendicular to the surface to which the nut anchors. A flange nut is used inside a specially shaped dished-out washer. The device is commonly used in the aerospace industry.

Q: Where do you use a flange nut?

A: Flanged nuts are widely used within applications that experience high vibrations. These applications would typically employ a flanged nut with a serrated locking mechanism to provide additional clamping force and locking during the entire life of the mechanism.

Q: What is the advantage of a flange nut?

A: They are used to spread the load evenly to avoid uneven fastening surface of the operations. They also ensure that the fasteners are in place without moving about loosely. These wide flange nuts can be used as a replacement to the nut and washer combination.

Q: Do I need a lock washer with a flange nut?

A: You can leave out washers when using this type of nut, since the flange extends the bearing surface and those serrations need direct contact with the mating surface. This may save time and money on your application.

Q: What is a flange lock nut?

A: Serrated Hex Flange Nuts are hex nuts with an integrated flange on one side to create a wider bearing surface. The serrated surface creates a locking effect against the material being fastened. Eliminates the need for a separate washer, and highly resistant to vibrations or loosening over time.

Q: What is the difference between flanged and non flanged nuts?

A: Flange nuts have the advantage of the flange material supporting and preserving the start thread. Hardened flange nuts can withstand significant radial deflection and still start the assembly easily, where a hex nut would not.

Q: What does a flange nut look like?

A: All flange nuts have a protruding rim on one side. One side looks like a traditional nut, whereas the other side has a protruding rim. The protruding rim on flange nuts essentially acts as a built-in washer. Washers are fasteners as well.

Q: When should you use a lock nut?

A: This makes lock nuts especially useful in applications where the bolt or nut assembly will be subject to vibrating or torque forces while installed. An obvious example of this is in engines and other automotive parts. They are also widely used in various other mechanical and industrial applications.

Q: Do I need a washer with a flange nut?

A: Flange nuts eliminate the need for a separate washer. You won't have to install a separate washer when using them because the protruding rim performs the same task. The protruding rim will distribute the fastener's load over a larger surface area - just like a separate washer will.

Q: What is the difference between a flange nut and a lock nut?

A: A flange nut provides a built-in washer (flange) that distributes the clamping load over a wider area as compared to a regular hex lock nut. The flange nut design does not require a flat washer and is the better option when there is an oversized or slotted hole.

Q: Can you reuse a flange nut?

A: Reusing nuts, bolts, washers, and other mechanical fasteners is generally never a good idea. If you have any doubts about a fastener's condition, it is best to discard it in favor of new fasteners as that will always result in a stronger, more durable joint.

Q: How do you tell if a nut is a lock nut?

A: Unlike free spinning nuts, lock nuts feature a deforming elastic or metal material that fortifies the secured threaded position to resist torque and shock.

Q: What is the point of a flange nut?

A: A flange nut is a nut that has a wide flange at one end. This flange acts as an integrated washer. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface.

Q: Where can I use flange nuts?

A: Vibration Resistance: Flange nuts are especially effective in applications where vibration is a concern. The flange creates a locking effect, minimizing the chances of the nut loosening due to vibrations.

Q: How do you tighten flange nuts?

A: Always use a torque wrench or other controlled-tensioning device for tightening. The sequence in which bolts or studs are tightened has a substantial bearing upon the distribution of the assembly pressure on the gasket. Consequently always torque nuts in a cross bolt tightening pattern.

Q: What rule should be used when tightening flange bolts?

A: Make sure that the tightening load to every bolt is applied uniformly as possible. You can carry the tightening in three to four stages in the steps of 70, 50, and 30 percent of the final torque value. The fourth stage uses 70 percent again for the final torque value.

Q: What is the benefit of a flange nut?

A: A flange nut is a nut that has a wide flange at one end that acts as an integrated washer. This serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface.

Q: When to use flanged nuts?

A: Flange nuts are commonly used to speed up assembly operations or in areas where their larger bearing surface can cover oversized holes or slots The additional bearing surface also serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage or to loosen.

Q: What is the advantage of a flange nut?

A: They are used to spread the load evenly to avoid uneven fastening surface of the operations. They also ensure that the fasteners are in place without moving about loosely. These wide flange nuts can be used as a replacement to the nut and washer combination.

Q: How does a locking nut work?

A: Lock nuts which use friction are designed with pitted or flanged grooves and need greater torque to tighten and loosen. They don't spin freely along the fastener's shaft, as they begin to clamp down as you rotate them.

Hot Tags: flange locking nut, China flange locking nut manufacturers, suppliers, factory, Screw Connecting Nut, Square Neck Bolt, Reinforcement Device, External Hexagonal Bolt, bolt and nut, Channel Steel Plastic Wing Nut

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag