There are obvious differences between cable tray and trough box in function, wiring method, applicable scenarios, heat dissipation, sealing, filling rate, material thickness and installation method.
Function and wiring method: Cable trough box is mainly used to arrange cables on walls, floors or ceilings, hide and protect cables, and provide easily accessible cable paths. It is suitable for arranging cables along a specific path, providing a safe and orderly wiring method. In contrast, cable tray is a structure for supporting and hanging cables, usually a frame composed of beams and brackets, used to span a large distance and support multiple cables, providing a wiring solution with large space and strong load-bearing capacity. Cable tray is more suitable for hanging cables in the air or high altitude, spanning a large distance, and providing an effective cross-wiring method.
Applicable scenarios: Cable trough boxes are commonly used in indoor electrical wiring, such as offices, shops and residences, and are used for wiring of shorter distances and a small number of cables. Cable trays are usually used for outdoor cable wiring, building exteriors or across roads, and are suitable for long-distance and multi-cable wiring requirements.
Heat dissipation and sealing: Cable ladders are fully open and have the best cable heat dissipation performance; perforated trays have slightly better heat dissipation; non-perforated trays are second; trough boxes (i.e. non-perforated trays with cover plates) have the worst heat dissipation performance. Trough boxes have a good effect on controlling cable shielding interference and protecting cables in general corrosive environments, and are more beautiful2. Most bridges are open. Considering the heat dissipation and installation requirements of cables, they are mostly used for aerial and indoor installation. Trough boxes can be closed or semi-open, and do not necessarily need to be supported by brackets. They can be laid in cable trenches and building mezzanines.
Filling rate and material thickness: According to relevant specifications, the total cross-section of wires and cables in trough boxes should not exceed 20% of the cross-section of the cable trough, and the number of current-carrying conductors should not exceed 30. The total cross-section of the cable in the bridge should not exceed 40% of the cross-section. This is due to the different installation heights. A lower installation height must have a cover plate. If there is a cover plate, the heat dissipation is not good, and the filling rate will be smaller. Metal trough boxes are also called trough bridges. They are generally trough-shaped components bent from a whole steel plate with a thickness of 0.4-1.5mm.
Installation and maintenance: Trough boxes are relatively simple to install and are usually fixed in the desired position by connectors or brackets. They can be cut and adjusted to suit specific wiring needs and can be easily integrated with other wiring systems. Trough boxes are mainly used to support and protect wires and cables, provide a neat and orderly wiring method, and are easy to maintain and manage.
In summary, cable trays and trough boxes each have their own characteristics and applicable scenarios. Which one to choose depends on the specific wiring needs and environmental conditions.




