There are numerous types of duct seismic supports, which can be categorized based on multiple dimensions, such as installation direction, location, and application scenario. Each type of support has its own specific functions and application scenarios, as follows:
Based on installation direction, they are primarily categorized as longitudinal and transverse. Longitudinal supports are used to prevent displacement of the duct along its axis (i.e., length) during an earthquake. They are typically connected to the longitudinal load-bearing components of the building structure, and the spacing between them must be specified according to the duct specifications and seismic fortification intensity. Transverse supports address displacement perpendicular to the duct axis (i.e., width or height). During installation, they are aligned with the building structure's transverse load-bearing components, and the spacing requirements differ from those for longitudinal supports. Both types must be used in conjunction to form a complete seismic support system.
Based on installation location, they can be categorized as hangers, sidewall supports, and floor-standing supports. A hanger is a common method of suspending duct from a ceiling or floor using a hanger rod. It's suitable for most suspended ducts and can be adjusted to accommodate different height requirements by adjusting the hanger rod length. A sidewall bracket is installed on the side of a wall or column, leveraging the wall's load-bearing capacity to secure the duct. It's often used when the duct is close to a side wall and inconveniently located for ceiling installation. A floor bracket is supported directly on the ground or floor and is primarily suitable for large, heavy floor-standing ducts. The bottom is typically secured to the ground with expansion bolts, providing greater stability.
Specific brackets are available for specific duct types and characteristics. For example, flexible duct seismic brackets often feature flexible or adjustable connectors that accommodate slight deformations and prevent damage to the duct caused by rigid connections. Composite duct seismic brackets, taking into account the material properties of composite ducts, feature anti-slip and anti-breakage treatments on crossarms and clamps to prevent the bracket from squeezing and damaging the duct surface.
Specialized seismic brackets are also available for specialized installations. When ducts are located at bends, specialized seismic supports are required. These supports typically utilize a multi-directional load-bearing structure to withstand the complex seismic forces generated by the duct's changing orientation at bends. When ducts pass through building expansion joints, specialized expansion joint supports are required. These supports have a certain degree of expansion and contraction compensation to accommodate relative displacement of the structures on either side of the joint. For ducts located near equipment such as fans and air conditioning units, equipment interface supports are required. The connectors on these supports offer a certain degree of cushioning, reducing the impact of equipment vibration and seismic forces on the duct interface.
Based on the structural form, seismic supports can be categorized as off-the-shelf and custom-made. Off-the-shelf seismic supports are standardized, factory-produced products with a complete range of accessories and easy installation. They are compatible with most common duct sizes and installation scenarios, offering a high cost-effectiveness. Customized seismic supports are designed for ducts with special dimensions and complex installation environments (such as confined spaces and special-shaped ducts). They require specific load-bearing capacity calculations and structural design decisions based on specific requirements. These supports are custom-made by the manufacturer to meet individual seismic support needs.






