Hinge Installation And Adjustment Method

Jun 19, 2024 Leave a message

The hinge installation and adjustment method mainly includes the following steps:

Installing hinges: First, install the hinges on the door and door frame and fix them with screws. It should be noted that the position and fixing method of the hinges need to match the door and door frame to ensure safety and stability.
Adjusting hinges:
Door coverage distance adjustment: Adjust the door coverage distance by rotating the screw. Turning the screw to the right will reduce the door coverage distance; turning the screw to the left will increase the door coverage distance.
Depth adjustment: Use the eccentric screw to directly and continuously adjust the depth of the door.
Height adjustment: The height can be precisely adjusted through the adjustable height hinge base.
Spring force adjustment: Some hinges can not only be adjusted in three dimensions, but also adjust the closing and opening force of the door. Normal tall and heavy doors need to take the maximum force as the base point. When used on narrow doors and glass doors, the spring force needs to be adjusted.
For the installation and adjustment method of 165-degree hinges, the basic steps are the same as above, but may need to be adjusted according to the specific design of the 165-degree hinge. For example, special attention may need to be paid to the installation position and orientation of the hinge to ensure that it can support large opening and closing angles.

In addition, regular maintenance is also an important step to ensure the normal operation and service life of the hinge. After installation, the hinge should be inspected and maintained regularly to ensure its normal operation.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry