
High-strength structural design
Long-span cable trays are made of Q235B high-strength steel, aluminum alloy or stainless steel, and are galvanized and spray-coated to enhance corrosion resistance. Most of the structures are hollow trusses or reinforced ribs, with "I"-shaped and "O"-shaped frames to improve rigidity, reduce material usage, and ensure the bearing capacity under long spans, and control deflection within the specification range.
Accurate load and span matching
During design, it is necessary to accurately calculate static loads such as cable deadweight and personnel maintenance, as well as dynamic loads such as wind and earthquake, and use mechanical formulas to determine the cross-sectional size of the bridge. Conventional spans are 3-12 meters. The bridge height and support spacing are adjusted according to different spans to ensure good bending resistance under large spans and avoid cable damage due to bridge deformation.


Strengthened installation and support system
H-shaped steel columns or steel structure trusses are used for support. The support spacing is scientifically set according to the span and fixed to the main building through expansion bolts. The connection method uses high-strength bolts or full welding technology, and elastic shock absorbers are added in some scenes to relieve thermal expansion and contraction stress and ensure the connection strength and structural stability of the bridge.
Multi-environment adaptability design
For special scenes such as outdoor and fire prevention, waterproof eaves, fireproof rock wool filling and other structures are designed to meet wind resistance and fire resistance standards. At the same time, through the design of large openings and cable fixing devices, large-diameter cable laying and later maintenance convenience are taken into account to ensure the safety and practicality of the bridge in complex environments.





